| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This series JPSK-303CSK CNC Busbar processing machine Manufacturer in China has three units: punching shearing and bending. It is easy to adjust each unit to shorten the processing time and improve the production efficiency.
The bending unit uses the imported PLC control system, which has a stable system and high precision. It is used to process copper and aluminum busbars in different specification. By relative operation unit it can and quickly do all kinds of processing to copper and aluminum Busbar, such as shearing, punching(circular hole and oblong hole), flat/Vertical bending and knurling.change different mold to do special processing to copper bar, such as flat press, embossing, cable connector process, and can do cutting,flat Crushing pushing and bending.
|
Function |
Model |
JPSK-303CSK |
JPSK-303SK |
|
Punching |
Max.punching force(kn) |
300 |
300 |
|
Punching diameter range(mm) |
4.3-25 |
4.3-25 |
|
|
Max.thickness(mm) |
12 |
12 |
|
|
Max.width(mm) |
160 |
160 |
|
|
Shearing/Cutting |
Max.shearing thickness(mm) |
12 |
12 |
|
Max.shearing width(mm) |
160 |
160 |
|
|
Horizontal bending |
Max.bending force(kn) |
300 |
300 |
|
Max.width(mm) |
160 |
160 |
|
|
Max.thickness(mm) |
12 |
12 |
|
|
Horizontal bending |
Max.width(mm) |
100 |
100 |
|
Min.angle(Degree) |
90° |
90° |
|
|
Out dimension |
mm |
1780*1380*1420 |
1780*1380*1420 |
|
Power |
Kw |
1x4kw |
3x4kw |
|
Weight |
Kg |
1150kg |
1270kg |
|
CNC precision |
Bending precision |
±1 |
±1 |
|
Repeat bending precision |
±0.5 |
±0.5 |
Bus bar Cutting
1.cutting unit:
1) sharp shearing,no droop,no burrs,no waste.
2)3 ways to prevent busbar from moving.
3)two kind of switches(foot switch and press button).
4)beveled knife,easy to cut.
5)the four sides of the knife can be exchanged to cut.
6)measuring ruler measure the length of busbar.
Bus bar Punching
1)united six-mold turnplate to make sure the upper mold and the lower mold are absolutely in the center.
2)the turnplate in tooth shape to make sure a good view and high strengh.
3)three location modes:locating pin,locating ruler and light.
4)no pressing mark on the workpiece surface.
5)can punch non-standard hole.
6)2 limit switches(foot switch and press button).
#Punching dies:
8 sets of standard punching dies(choose from the following size)
The price is including in the machine price.
Round punching dies(mm):Φ7,Φ9,Φ11,Φ13,Φ15,Φ17,Φ19,Φ21
Oval punching dies(mm):Φ7*11,Φ9*13,Φ11*15,Φ13*18,Φ17*21
Arc punching dies(mm):R5,R10,R15
We can also customise the punching dies as your requirement.
Bus bar Bending(automatic)
#Bending unit
1)make horizontal bending,vertical bending U-bending,embossing and twisting.
2)just input the thickness and the angle on the CNC touching screen,get the busbar shape.
3)high bending precision ±1°,repeat bending ±0.5°.
4)automatically account the processing busbars if quantity production.
5)control the bending speed by the CNC touching screen.
6)inch moving to complete the repeat bending.
Processed Samples
){kind=link}