Product Description
Manual JPMX-303DM hydraulic busbar cutting punching and bending machine
This series of busbar processing machine has three processing units:punching,shearing and bendin. The three units can be used simultaneously or sequentially ,the working stroke of each processing unit can be easily adjusted ,which shortens the processing time and improves productions efficiency.The main funciton is processing copper and aluminum busbar.
The cutting processing unit adopts vertical processing mode ,flexible and convenient to operate.It adopts flat blade cutting,and the incision interface of workpiece is flat ,no waste,burrs and droop.
The punching unit uses a six-mode turnplate in tooth shape with good view ,and no need to change the dies frequently,and the operation is simple and efficient.
The bending unit adopts closed integral frame structure ,by changing molds,could be completed the processing of flat bending or vertical bending.
Detailed Photos
Product Parameters
| |
Model |
| JPSK-303CM |
JPSK-303DM |
| Nominal force (kn) |
300 |
300 |
| Punching dia. range (mm) |
ф4.3~ф25 |
ф4.3~ф25 |
| Max.thickness (mm) |
12 |
12 |
| Max.width (mm) |
150 |
150 |
| Max.shearing thickness (mm) |
12 |
12 |
| Max.shearing width (mm) |
150 |
150 |
| Max.horizontal bending width (mm) |
150 |
150 |
| Max.horizontal bending thickness (mm) |
12 |
12 |
| Max.vertical bending size (mm) |
10×100 |
10×100 |
| Power (kw) |
1×4KW |
3×4KW |
| Table size (mm) |
1650×1050 |
1650×1050 |
| Outside dimension (mm) |
1720×1220×1220 |
1720×1220×1220 |
| Container size (mm) |
1800×1300×1430 |
1800×1300×1430 |
| Total weight (kg) |
1220KG |
1320KG |
Our Advantages
- The cutting processing unit adopts vertical processing mode, flexible and convenient to operate. It adopts flat blade cutting, and the incision interface of workpiece is flat, no waste, burrs and droop.
- The punching unit uses a six-mode turnplate in tooth shape with good view, and no need to change the dies frequently, and the operation is simple and efficient.
- The bending unit adopts a horizontal bending. By changing molds, could be completed the processing of flat bending or vertical bending.
- A variety of processing functions such as embossing, flattening, twisting, and crimping of cable ends can be achieved by changing the molds.
- The machine has four casters, so it is easy to be moved everywhere needed.
- Different molds or tools can be installed according to user requirements to complete special shape processing.
Audited Supplier 
){kind=link}